万晨驰固公司动态,永年U型螺栓厂家_U型螺栓_U型螺丝_U型螺栓厂-万晨U型螺栓厂家

热门关键词:

U型螺栓厂家介绍GB标准大全_U型螺栓

返回列表 来源: 发布日期: 2020-07-27 14:14
  原标题:U型螺栓厂家介绍GB标准大全
  下面就是我们紧固件行业中的所有遇到的国家标准的代码和中文对应的称呼。
  1型六角螺母 GB/T 6170-2000
  六角薄螺母 GB/T 6172.1-2000
  盖形螺母 GB/T 923-88
  标准型弹簧垫圈 GB/T 93-87
  内六角沉头螺钉 GB/T 70.3-2000
  内六角平圆头螺钉 GB/T 70.2-2000
  内六角圆柱头螺钉 GB/T 70.1-2000
  内六角凹端紧定螺钉 GB/T 80-2000
  平垫圈 A级 GB/T 97.1-2002
  钢结构用高强度垫圈 GB/T 1230-91
  钢结构用高强度大六角头螺母 GB/T 1229-91
  钢结构用高强度大六角头螺栓 GB/T 1228-91
  大半圆头方颈螺栓 C级 GB/T 14-1998
  半圆头方颈螺栓 GB/T 12-88
  十字槽小盘头螺钉 GB/T 823-88
  等长双头螺柱 B级 GB/T 901-88
  十字槽沉头螺钉 第1部分:钢4.8级 GB/T 819.1-2000
  十字槽盘头螺钉 GB/T 818-2000
  开口型扁圆头抽芯铆钉 GB/T 12618-90
  圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000
  十字槽沉头自攻螺钉 GB/T 846-85
  十字槽盘头自攻螺钉 GB/T 845-85
  小垫圈 A级 GB/T 848-2002
  大垫圈 A级 GB/T 96.1-2002
  六角头螺栓 GB/T 5782-2000

  六角头螺栓 全螺纹 GB/T 5783-2000

  所有GB标准螺栓
  方头螺栓 C级 Square head bolts-Product grade C
  GB/T 8-88 | UDC 621.882.6 | 代替GB8-76
  沉头方颈螺栓 Flat countersunk square neck bolts
  GB/T 10-88 | UDC 621.882.6 | 代替GB10-76
  沉头带榫螺拴 Flat countersunk nib bolts
  GB/T 11-88 | UDC 621.882.6 | 代替GB11-76
  半圆头方颈螺栓 Cup head square neck bolts
  GB/T 12-88 | UDC 621.882.6 | 代替GB12-76
  半圆头带榫螺栓 Cup head nid bolts
  GB/T 13-88 | UDC 621.882.6 | 代替GB13-76
  大半圆头方颈螺栓 C级 Cup head square neck bolts with large head-Product grade C
  GB/T 14-1998 | 代替GB14-88
  大半圆头带榫螺栓 Cup head nib bolts with large head
  GB/T 15-88 | UDC 621.882.6 | 代替GB15-76
  六角头铰制孔用螺栓 Hexagon fit bolts-product grade A and B
  GB/T 27-88 | UDC 621.882.6 | 代替GB27-76
  六角头螺杆带孔铰制孔用螺栓 Hexagon fit bolts with split pin hole on shank-product grade A and B
  GB/T 28-88 | UDC 621.882.6 | 代替GB28-76
  六角头头部带槽螺栓 A 和 B 级 Hexagon bolts with slot on head -product A and B
  GB/T 29.1-88 | UDC 621.882.6 | 代替GB29-76
  十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
  GB/T 29.2-88 | UDC 621.882.6 | 代替GB29-76
  下方头螺栓 B级 Square head bolts with small head-praduct grade B
  GB/T 35-88 | UDC 621.882.6 | 代替GB35-76
  T 形槽用螺栓 Bolts for T-Slot
  GB/T 37-88 | UDC 621.882.6 | 代替GB37-76
  加强半圆头方颈螺栓 Strengthened cup head square neck bolts
  GB/T 794-93 | 代替GB794-67
  六角头螺杆带孔螺栓 Hexagon bolts with split pin hole on shank-product grade A and B
  GB/T 31.1-88 | UDC 621.882.6 | 代替GB31、23、24-76
  六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
  GB/T 31.2-88 | UDC 621.882.6 | 代替GB31、23、24-76
  六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
  GB/T 31.3-88 | UDC 621.882.6 | 代替GB31、23、24-76
  六角头头部带孔螺栓 A 和 B级 Hexagon bolts with wire holes on head-product grade A and B
  GB/T 32.1-88 | UDC 621.882.6 | 代替GB32、25、26-76
  六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on head-Reduced shank-product grade B
  GB/T 32.2-88 | UDC 621.882.6 | 代替GB32、25、26-76
  六角头头部带孔螺栓 细牙 A 和 B 级 Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B
  GB/T 32.3-88 | UDC 621.882.6 | 代替GB32、25、26-76
  活节螺栓 Eye bolts
  GB/T 798-88 | UDC 621.882.6 | 代替GB798-76
  地脚螺栓 Eyelet bolts
  GB/T 799-88 | UDC 621.882.6 | 代替GB799-76
  沉头双榫螺 Flat countersunk double nib bolts
  GB/T 800-88 | UDC 621.882.6 | 代替GB800-77
  小半圆头低方颈螺栓 B级 Cup head square neck bolts with small head and short neck-product grade B
  GB/T 801-1998 | 代替GB801-88
  六角头螺栓 C级 Hexagon head bolts-product grade C
  GB/T 5780-2000 | 代替GB/T 5780-1986
  六角头螺栓 全螺纹 C级 Hexagon head bolts-Full thread-product grade C
  GB/T 5781-2000 | 代替GB/T 5781-1986
  六角头螺栓 Hexagon head bolts
  GB/T 5782-2000 | 代替GB/T 5782-1986
  六角头螺栓 全螺纹 Hexagon head bolts-Full thread
  GB/T 5783-2000 | 代替GB/T 5783-1986
  六角头螺栓-细杆-B级 Hexagon head bolts-Reduced shank -Product grade B
  GB/T 5784-86 | UDC 621.882.6 | 代替GB30、21-76
  六角头螺栓 细牙 Hexagon head bolts with fine pitch thread
  GB/T 5785-2000 | 代替GB/T 5785-1986
  六角头螺栓 细牙 全螺纹 Hexagon head bolts with fine pitch thread-Full thread
  GB/T 5786-2000 | 代替GB/T 5786-1986
  六角法兰面螺栓-加大系列-B级 Hexagon flange bolts-Heavy series-product grade B
  GB/T 5789-86 | UDC 621.882.6
  六角法兰面螺栓-加大系列-细杆-B级 Hexagon flange bolts-Heavy series-product grade B
  GB/T 5790-86 | UDC 621.882.6
  六角法兰面螺栓 小系列 Hexagon flange bolts-Small series
  GB/T 16674-1996 | 代替GB/T 5787、5788-1986
  钢网架螺栓球节点用高强度螺栓 High strength bolts for joints of space grid structures
  GB/T 16939-1997
  螺钉
  开槽凹端紧定螺钉 Slotted set screws with cup point
  GB/T 74-85 | UDC 621.882.219.4.092.6 | 代替GB74-76
  方头长圆柱端紧定螺钉 Square set screws with long dog point
  GB/T 85-88 | UDC 621.882.2 | 代替GB85-76
  十字槽半沉头螺钉 Countersunk raised head screws (common head style) with cross recess
  GB/T 820-2000 | 代替GB/T 820-1985
  开槽圆柱端定位螺钉 Slotted setscrews with dog point
  GB/T 829-88 | UDC 621.882.2 | 代替GB829-76
  开槽大圆柱头螺钉 Slotted large cheese head screws
  GB/T 833-88 | UDC 621.882.2 | 代替GB833-76
  六角头不脱出螺钉 Hexagon screws with waisted shank
  GB/T 838-88 | UDC 621.882.2 | 代替GB838-76
  滚花高头螺钉 Knurled thumb screws
  GB/T 834-88 | UDC 621.882.2 | 代替GB834-76
  滚花平头螺钉 Knurled screws
  GB/T 835-88 | UDC 621.882.2 | 代替GB835-76
  滚花小头螺钉 Knurled screws with small head
  GB/T 836-88 | UDC 621.882.2 | 代替GB836-76
  开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
  GB/T 837-88 | UDC 621.882.2 | 代替GB837-76
  方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end
  GB/T 86-88 | UDC 621.882.2 | 代替GB86-76
  十字槽盘头螺钉 Pan head screws with cross recess
  GB/T 818-2000 | 代替GB/T 818-1985
  十字槽沉头螺钉 第1部分:钢4.8级 Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8
  GB/T 819.1-2000 | 代替GB/T 819-1985
  十字槽沉头螺钉 第2部分:钢8.8、不锈钢A2-70和有色金属CU2或CU3 Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals
  GB/T 819.2-1997
  方头平端紧定螺钉 Square set screws with chamfered end
  GB/T 821-88 | UDC 621.882.2 | 代替GB821-76
  十字槽圆柱头螺钉 Cheese head screws with cross recess
  GB/T 822-2000 | 代替GB/T 822-1988
  十字槽小盘头螺钉 Cross recessed small pan head screws
  GB/T 823-88 | UDC 621.882.2 | 代替GB823-76
  吊环螺钉 Eyebolts
  GB/T 825-88 | UDC 621.882 | 代替GB825-76
  精密机械用紧固件十字槽螺钉 Fasteners for mechanics-Cross recessed screws
  GB/T 13806.1-92
  方头凹端紧定螺钉 Square set screws with cup point
  GB/T 84-88 | UDC 621.882.2 | 代替GB84-76
  开槽盘头定位螺钉 Slotted pan head set setscrews with dog point
  GB/T 828-88 | UDC 621.882.2 | 代替GB828-76
  滚花头不脱出螺钉 Knurled thumb screws with waisted shank
  GB/T 839-88 | UDC 621.882.2 | 代替GB839-76
  塑料滚花头螺钉 Plastic diamond knurlhead screws
  GB/T 840-88 | UDC 621.882.2 | 代替GB840-79
  开槽球面圆柱头轴位螺钉 Slotted raised head with shoulder
  GB/T 946-88 | UDC 621.882.2 | 代替GB946-76
  开槽球面大圆柱头螺钉 Slotted large raised cheese head screws
  GB/T 947-88 | UDC 621.882.2 | 代替GB947-76
  开槽沉头不脱出螺钉 Slotted countersunk head screws with waisted shank
  GB/T 948-88 | UDC 621.882.2 | 代替GB948-76
  开槽半沉头不脱出螺钉 Slotted raised countersunk head screws with waisted shank
  GB/T 949-88 | UDC 621.882.2 | 代替GB949-76
  开槽长圆柱端紧定螺钉 Slotted set screws with long dog point
  GB/T 75-85 | UDC 621.882.219.4.092.5 | 代替GB75-76
  方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end
  GB/T 83-88 | UDC 621.882.2 | 代替GB83-76
  开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder
  GB/T 830-88 | UDC 621.882.2 | 代替GB830-76
  开槽无头轴位螺钉 Slotted shoulder screws
  GB/T 831-88 | UDC 621.882.2 | 代替GB831-76
  开槽带孔球面圆柱头螺钉 Slotted capstan screws
  GB/T 832-88 | UDC 621.882.2 | 代替GB832-76
  开槽圆柱头螺钉 Slotted cheese head screws
  GB/T 65-2000 | 代替GB/T 65-1985
  开槽盘头螺钉 Slotted pan head screws
  GB/T 67-2000 | 代替GB/T 67-1985
  开槽沉头螺钉 Slotted countersunk flat head screws (common head style)
  GB/T 68-2000 | 代替GB/T 68-1985
  开槽半沉头螺钉 Countersunk slotted raised head screws (common head style)
  GB/T 69-2000 | 代替GB/T 69-1985
  开槽锥端紧定螺钉 Slotted set screws with cone point
  GB/T 71-85 | UDC 621.882.219 | 代替GB71-76
  开槽锥端定位螺钉 Slotted setscrews with cone point
  GB/T 72-88 | UDC 621.882.2 | 代替GB72-76
  开槽平端紧定螺钉 Slotted set screws with flat point
  GB/T 73-85 | UDC 621.882.219.4 | 代替GB73-76
  内六角螺钉
  内六角花形盘头螺钉 Hexagon lobular socket pan head screws
  GB/T 2672-86 | UDC 621.882.2 | 代替GB2672-81
  内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws
  GB/T 5281-85 | UDC 621.882.215.6
  内六角花形沉头螺钉 Hexagon lobular socket countersunk head screws
  GB/T 2673-86 | UDC 621.882.2 | 代替GB2673-81
  内六角花形半沉头螺钉 Hexagon lobular socket raised countersunk head screws
  GB/T 2674-86 | UDC 621.882.2 | 代替GB2674-81
  内六角花形圆柱头螺钉-4.8级 Hexagon lobular socket head cap screws-property class 4.8
  GB/T 6190-86 | UDC 621.882.2 | 代替GB2671-81
  内六角花形圆柱头螺钉-8.8和10.9级 Hexagon lobular socket head cap screws-property class 8.8 and 10.9
  GB/T 6191-86 | UDC 621.882.2 | 代替GB2671-81
  内六角平端紧定螺钉 Hexagon socket set screws with flat point
  GB/T 77-2000 | 代替GB/T 77-1985
  内六角锥端紧定螺钉 Hexagon socket set screws with cone point
  GB/T 78-2000 | 代替GB/T 78-1985
  内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point
  GB/T 79-2000 | 代替GB/T 79-1985
  内六角凹端紧定螺钉 Hexagon socket set screws with cup point
  GB/T 80-2000 | 代替GB/T 80-1985
  内六角圆柱头螺钉 Hexagon socket head cap screws
  GB/T 70.1-2000 | 代替GB/T 70-1985
  内六角平圆头螺钉 Hexagon socket button head screws
  GB/T 70.2-2000
  内六角沉头螺钉 Hexagon socket countersunk head screws
  GB/T 70.3-2000
  自攻螺钉
  十字槽半沉头自攻锁紧螺钉 Cross recessed raised countersunk head thread forming screws
  GB/T 6562-86 | UDC 621.882
  六角头自攻锁紧螺钉 Hexagon head thread forming screws
  GB/T 6563-86 | UDC 621.882
  内六角花形圆柱头自攻锁紧螺钉 Hexagon lobular socket thread forming screws
  GB/T 6564-86 | UDC 621.882
  十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
  GB/T 845-85 | UDC 621.882.216.5.082.8 | 代替GB845-76
  十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
  GB/T 846-85 | UDC 621.882.216.5.082.8 | 代替GB846-76
  十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
  GB/T 847-85 | UDC 621.882.216.5.082.8 | 代替GB847-76
  开槽盘头自攻螺钉 Slotted pan head tapping screws
  GB/T 5282-85 | UDC 621.882.215.082.8
  开槽沉头自攻螺钉 Slotted countersunkhead tapping screws
  GB/T 5283-85 | UDC 621.882.215.082.8
  开槽半沉头自攻螺钉 Slotted raised countersunkhead tapping screws
  GB/T 5284-85 | UDC 621.882.215.082.8
  六角头自攻螺钉 Hexagon head tapping screws
  GB/T 5285-85 | UDC 621.882.215.082.8
  十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws
  GB/T 6560-86 | UDC 621.882
  十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming screws
  GB/T 6561-86 | UDC 621.882
  十字槽头凹穴六角头自攻螺钉 Cross recessed hexagon head tapping screws with indentation
  GB/T 9456-88 | UDC 621.882.2
  精密机械用紧固件十字槽自攻螺钉 刮削端 Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point
  GB/T 13806.2-92
  墙板自攻螺钉 Dry wall screws
  GB/T 14210-93
  十字槽盘头自钻自攻螺钉 Cross recessed pan head drilling screws with tapping screw thread
  GB/T 15856.1-2002 | 代替GB/T 15856.1-1995
  十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
  GB/T 15856.2-2002 | 代替GB/T 15856.2-1995
  十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head drilling screws with tapping screw thread
  GB/T 15856.3-2002 | 代替GB/T 15856.3-1995
  六角法兰面自钻自攻螺钉 Hexagon flange drilling screws with tapping screw thread
  GB/T 15856.4-2002 | 代替GB/T 15856.4-1995
  六角凸缘自钻自攻螺钉 Hexagon washer head drilling screws with tapping screw thread
  GB/T 15856.5-2002
  六角凸缘自攻螺钉 Hexzgon head tapping screws with collar
  GB/T 16824.1-1997
  六角法兰面自攻螺钉 Hexagon flange head tapping screws
  GB/T 16824.2-1997
  木螺钉
  开槽圆头木螺钉 Slotted round head wood screws
  GB/T 99-86 | UDC 621.882.2 | 代替GB99-76
  开槽沉头木螺钉 Slotted countersunk head wood screws
  GB/T 100-86 | UDC 621.882.2 | 代替GB100-76
  开槽半沉头木螺钉 Slotted raised countersunk head wood screws
  GB/T 101-86 | UDC 621.882.2 | 代替GB101-76
  六角头木螺钉 Hexagon head wood screws
  GB/T 102-86 | UDC 621.882.2 | 代替GB102-76
  十字槽圆头木螺钉 Cross recessed round head wood screws
  GB/T 950-86 | UDC 621.882.2 | 代替GB950-76
  十字槽沉头木螺钉 Cross recessed countersunk head wood screws
  GB/T 951-86 | UDC 621.882.2 | 代替GB951-76
  十字槽半沉头木螺钉 Cross recessed raised head countersunk head wood screws
  GB/T 952-86 | UDC 621.882.2 | 代替GB952-76
  螺杆和螺柱
  储能焊用焊接螺柱 Weld studs for capacitor discharge welding
  GB/T 902.3-89 | 代替GB902-76
  等长双头螺柱 C级 Double end studs(clamping type)-product grade C
  GB/T 953-88 | UDC 621.882 | 代替GB953-76
  螺杆 Threaded rods
  GB/T 15389-94
  双头螺柱 bm=1d Double end studs-bm=1d
  GB/T 897-88 | UDC 621.882 | 代替GB897-76
  双头螺柱 bm=1.25d Double end studs-bm=1.25d
  GB/T 898-88 | UDC 621.882 | 代替GB898-76
  双头螺柱 bm=1.5d Double end studs-bm=1.5d
  GB/T 899-88 | UDC 621.882 | 代替GB899-76
  双头螺柱 bm=2d Double end studs--bm=2d
  GB/T 900-88 | UDC 621.882 | 代替GB900-76
  等长双头螺柱 B级 Double end studs(clamping type) -Product grade B
  GB/T 901-88 | UDC 621.882 | 代替GB901-76
  手工焊用焊接螺柱 Weld studs for manual welding
  GB/T 902.1-89 | 代替GB902-76
  机动弧焊用焊接螺柱 Weld studs for arc welding
  GB/T 902.2-89 | 代替GB902-76
  铆钉
  平头铆钉 Flat head rivets
  GB/T 109-86 | UDC 621.884 | 代替GB109-76
  标牌铆钉 Rivets for name plate
  GB/T 827-86 | UDC 621.884 | 代替GB827-76
  半圆头铆钉(粗制) Round head rivets-Black
  GB/T 863.1-86 | UDC 621.884 | 代替GB863-76
  小半圆头铆钉(粗制) Round head rivets with small head-Black
  GB/T 863.2-86 | UDC 621.884
  平锥头铆钉(粗制) Cone head rivets-Black
  GB/T 864-86 | UDC 621.884 | 代替GB864-76
  沉头铆钉(粗制) Countersunk head rivets-Black
  GB/T 865-86 | UDC 621.884 | 代替GB865-86
  半沉头铆钉(粗制) Oval countersunk head rivets-Black
  GB/T 866-86 | UDC 621.884 | 代替GB866-76
  半圆头铆钉 Round head rivets
  GB/T 867-86 | UDC 621.884 | 代替GB867-76
  平锥头铆钉 Cone head rivets
  GB/T 868-86 | UDC 621.884 | 代替GB868-76
  沉头铆钉 Countersunk head rivets
  GB/T 869-86 | UDC 621.884 | 代替GB869-76
  半沉头铆钉 Oval countersunk head rivets
  GB/T 870-86 | UDC 621.884 | 代替GB870-76
  扁圆头铆钉 Flat round head rivets
  GB/T 871-86 | UDC 621.884 | 代替GB871-76
  扁平头铆钉 Thin head rivets
  GB/T 872-86 | UDC 621.884 | 代替GB872-76
  扁圆头半空心铆钉 Oval head semi-tubular rivets
  GB/T 873-86 | UDC 621.884 | 代替GB873-76
  120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
  GB/T 874-86 | UDC 621.884 | 代替GB874-76
  扁平头半空心铆钉 Thin head semi-tubular rivets
  GB/T 875-86 | UDC 621.884 | 代替GB875-76
  空心铆钉 Tubular rivets
  GB/T 876-86 | UDC 621.884 | 代替GB876-76
  120°沉头铆钉 120 degree countersunk head rivets
  GB/T 954-86 | UDC 621.884 | 代替GB954-76
  管状铆钉 Pipe type rivets
  GB/T 975-86 | UDC 621.884 | 代替GB975-76
  大扁圆头铆钉 Truss head rivets
  GB/T 1011-86 | UDC 621.884 | 代替GB1011-76
  120°半沉头铆钉 120 degree oval countersunk rivets
  GB/T 1012-86 | UDC 621.884 | 代替GB1012-76
  平锥头半空心铆钉 Cone head semi-tubler rivets
  GB/T 1013-86 | UDC 621.884 | 代替GB1013-76
  大扁圆头半空心铆钉 Truss head semi-tublar rivets
  GB/T 1014-86 | UDC 621.884 | 代替GB1014-76
  沉头半空心铆钉 Countersunk head semi-tublar rivets
  GB/T 1015-86 | UDC 621.884 | 代替GB1015-76
  无头铆钉 Headless rivets
  GB/T 1016-86 | UDC 621.884 | 代替GB1016-76
  封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets
  GB/T 12615-90
  封闭型沉头抽芯铆钉 120 deg flush head break mandrel closed end blind rivets
  GB/T 12616-90
  开口型沉头抽芯铆钉 120 deg flush head break mandrel blind rivets
  GB/T 12617-90
  开口型扁圆头抽芯铆钉 Mushroom head break mandrel blind rivets
  GB/T 12618-90
  扁圆头击芯铆钉 Flat round head drive rivets
  GB/T 15855.1-1995
  沉头击芯铆钉 Countersunk head drive rivets
  GB/T 15855.2-1995
  螺母
  全金属六角法兰面锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
  GB/T 6187.2-2000
  方螺母 C级 Square nuts-product grade C
  GB/T 39-88 | UDC 621.882.3 | 代替GB39-76
  六角螺母 C级 Hexagon nuts-product grade C
  GB/T 41-2000 | 代替GB/T 41-1986
  六角厚螺母 Hexagon thick nuts
  GB/T 56-88 | 代替GB56-76
  蝶形螺母 Wing nuts
  GB/T 62-88 | UDC 621.882.3 | 代替GB62-76
  环形螺母 Lifting nuts
  GB/T 63-88 | UDC 621.882.3 | 代替GB63-76
  组合式盖形螺母 Acorn nuts
  GB/T 802-88 | UDC 621.882.3 | 代替GB802-76
  球面六角螺母 Hexagon nuts with raised face
  GB/T 804-88 | UDC 621.882.3 | 代替GB804-76
  2型六角螺母 Hexagon nuts,style 2
  GB/T 6175-2000 | 代替GB/T 6175-1986
  2型六角螺母 细牙 Hexagon nuts,style 2,with fine pitch thread
  GB/T 6176-2000 | 代替GB/T 6176-1986
  六角法兰面螺母 Hexagon nuts with flange
  GB/T 6177.1-2000 | 代替GB/T 6177-1986
  六角法兰面螺母 细牙 Hexagon nuts with flange-fine pitch thread
  GB/T 6177.2-2000
  1型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 1 -product grades A and B
  GB/T 6178-86 | UDC 621.882.3 | 代替GB57~58-76
  1型六角开槽螺母-C级 Hexagon slotted nuts,style 1 -product grade C
  GB/T 6179-86 | UDC 621.882.3 | 代替GB57~58-76
  2型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 2 -Product grades A and B
  GB/T 6180-86 | UDC 621.882.3
  六角开槽薄螺母-A和B级 Hexagon thin slotted nuts-Product grades A and B
  GB/T 6181-86 | UDC 621.882.3 | 代替GB59~60-76
  2型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 2
  GB/T 6182-2000 | 代替GB/T 6182-1986
  非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
  GB/T 6183.1-2000 | 代替GB/T 6183-1986
  非金属嵌件六角法兰面锁紧螺母 细牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread
  GB/T 6183.2-2000
  1型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 1
  GB/T 6184-2000 | 代替GB/T 6184-1986
  2型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 2
  GB/T 6185.1-2000 | 代替GB/T 6185-1986
  2型全金属六角锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
  GB/T 6185.2-2000
  2型全金属六角锁紧螺母 9级 Prevailing torque type all-metal hexagon nuts,style 2-Property class 9
  GB/T 6186-2000 | 代替GB/T 6186-1986
  全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange
  GB/T 6187.1-2000 | 代替GB/T 6187-1986
  扣紧螺母 Tight nuts
  GB/T 805-88 | UDC 621.882.3 | 代替GB805-76
  滚花高螺母 Knurled nut with collar
  GB/T 806-88 | UDC 621.882.3 | 代替GB806-76
  滚花薄螺母 Knurled nuts
  GB/T 807-88 | UDC 621.882.3 | 代替GB807-76
  小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread
  GB/T 808-88 | UDC 621.882.3 | 代替GB808-76
  嵌装圆螺母 Lnsert round nuts
  GB/T 809-88 | UDC 621.882.3 | 代替GB809-76
  小圆螺母 Small round nuts
  GB/T 810-88 | UDC 621.882.3 | 代替GB810-76
  圆螺母 Round nuts
  GB/T 812-88 | UDC 621.882.3 | 代替GB812-76
  端面带孔圆螺母 Round nuts with drilled holes in one face
  GB/T 815-88 | UDC 621.882.3 | 代替GB815-76
  侧面带孔圆螺母 Round nuts with set pin holes in side
  GB/T 816-88 | UDC 621.882.3 | 代替GB816-79
  带槽圆螺母 Slotted round nuts
  GB/T 817-88 | UDC 621.882.3 | 代替GB817-76
  1型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 1
  GB/T 889.1-2000 | 代替GB/T 889-1986
  1型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B
  GB/T 9457-88 | UDC 621.882.3 | 代替GB57、58-76
  2型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B
  GB/T 9458-88 | UDC 621.882.3
  六角开槽薄螺母 细牙 A和B级 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B
  GB/T 9459-88 | UDC 621.882.3 | 代替GB59、60-76
  焊接方螺母 Square weld nuts
  GB/T 13680-92
  焊接六角螺母 Hexagon weld nuts
  GB/T 13681-92
  平头铆螺母 Flat head riveted nuts
  GB/T 17880.1-1999
  沉头铆螺母 Countersunk head riveted nuts
  GB/T 17880.2-1999
  小沉头铆螺母 Small countersunk head riveted nuts
  GB/T 17880.3-1999
  120°小沉头铆螺母 120°Small countersunk head riveted nuts
  GB/T 17880.4-1999
  平头六角铆螺母 Flat head hexagon riveted nuts
  GB/T 17880.5-1999
  精密机械用六角螺母 Hexagon nuts for fine mechanics
  GB/T 18195-2000
  盖形螺母 Acorn nuts
  GB/T 923-88 | UDC 621.882.3 | 代替GB923-76
  1型非金属嵌件六角锁紧螺母 细牙 Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread
  GB/T 889.2-2000
  1型六角螺母 Hexagon nuts,style 1
  GB/T 6170-2000 | 代替GB/T 6170-1986
  1型六角螺母 细牙 Hexagon nuts,style 1,with fine pitch thread
  GB/T 6171-2000 | 代替GB/T 6171-1986
  六角薄螺母 Hexagon thin nuts(chamfered)
  GB/T 6172.1-2000 | 代替GB/T 6172-1986
  非金属嵌件六角锁紧薄螺母 Prevailing torque type hexagon thin nuts(with non-metallic insert)
  GB/T 6072.2-2000
  六角薄螺母 细牙 Hexagon thin nuts(chamfered) with fine pitch thread
  GB/T 6173-2000 | 代替GB/T 6173-1986
  六角薄螺母 无倒角 Hexagon thin nuts(unchamfered)
  GB/T 6174-2000 | 代替GB/T 6174-1986
  垫圈
  大垫圈 A级 Plain washers-Large series-Product grade A
  GB/T 96.1-2002 | 代替GB/T 96-1985
  大垫圈 C级 Plain washers-Large series-Product grade C
  GB/T 96.2-2002 | 代替GB/T 96-1985
  平垫圈 倒角型 A级 Plain washers,chamfered-Product grade A
  GB/T 97.2-2002 | 代替GB/T 97.2-1985
  平垫圈 用于螺钉和垫圈组合件 Plain washers for screw and washer assemblies
  GB/T 97.4-2002 | 代替GB/T 9074.24、9074.25-1988
  球面垫圈 Washers with ball face
  GB/T 849-88 | UDC 621.882.4 | 代替GB849-76
  锥面垫圈 Washers with cone face
  GB/T 850-88 | UDC 621.882.4 | 代替GB850-76
  开口垫圈 Washers with split
  GB/T 851-88 | UDC 621.882.4 | 代替GB851-76
  平垫圈 用于自攻螺钉和垫圈组合件 Plain washers for tapping screw and washer assemblies
  GB/T 97.5-2002 | 代替GB/T 9074.29、9074.30-1988
  小垫圈 A级 Plain washers-small series-Product grade A
  GB/T 848-2002 | 代替GB/T 848-1985
  工字钢用方斜垫圈 Square taper washers for I section
  GB/T 852-88 | UDC 621.882.4 | 代替GB852-76
  槽钢用方斜垫圈 Square taper washers for slot section
  GB/T 853-88 | UDC 621.882.4 | 代替GB853-76
  单耳止动垫圈 Tab washers with long tab
  GB/T 854-88 | UDC 621.882.4 | 代替GB854-76
  双耳止动垫圈 Tab washers with long tab and wing
  GB/T 855-88 | UDC 621.882.4 | 代替GB855-76
  外舌止动垫圈 External tab washers
  GB/T 856-88 | UDC 621.882.4 | 代替GB856-76
  圆螺母用止动垫圈 Tab washers for round nut
  GB/T 858-88 | UDC 621.882.4 | 代替GB858-76
  轻型弹簧垫圈 Single coil spring lock washers,Light type
  GB/T 859-87 | UDC 621.882.4 | 代替GB859-76
  鞍形弹性垫圈 Curved spring washers
  GB/T 860-87 | UDC 621.882.4 | 代替GB860-76
  内齿锁紧垫圈 Lock washers internal teeth
  GB/T 861.1-87 | UDC 621.882.4 | 代替GB861-76
  内锯齿锁紧垫圈 Serrated lock washers internal teeth
  GB/T 861.2-87 | UDC 621.882.4
  外齿锁紧垫圈 Lock washers external teeth
  GB/T 862.1-87 | UDC 621.882.4 | 代替GB862-76
  外锯齿锁紧垫圈 Serrated lock washers external teeth
  GB/T 862.2-87 | UDC 621.882.4
  波形弹性垫圈 Wave spring washers
  GB/T 955-87 | UDC 621.882.4 | 代替GB955-76
  锥形锁紧垫圈 Countersunk external toothed lock washers
  GB/T 956.1-87 | UDC 621.882.4 | 代替GB956-76
  锥形锯齿锁紧垫圈 Countersunk Serrated external toothed lock washers
  GB/T 956.2-87 | UDC 621.882.4
  特大垫圈 C级 Plain washers-Extra large series-Product grade C
  GB/T 5287-2002 | 代替GB/T 5287-1985
  重型弹簧垫圈 Single coil spring lock washers,heavy type
  GB/T 7244-87 | UDC 621.882.4
  鞍形弹簧垫圈 Curved Single coil spring lock washers
  GB/T 7245-87 | UDC 621.882.4
  波形弹簧垫圈 Wave Single coil spring lock washers
  GB/T 7246-87 | UDC 621.882.4
  标准型弹簧垫圈 Single coil spring lock washers Normal type
  GB/T 93-87 | UDC 621.882.4 | 代替GB93-76
  平垫圈 C级 Plain washers-Product grade C
  GB/T 95-2002 | 代替GB/T 95-1985
  平垫圈 A级 Plain washers-Product grade A
  GB/T 97.1-2002 | 代替GB/T 97.1-1985
  销轴用平垫圈 Plain washers for clevis pins
  GB/T 97.3-2000
  挡圈
  锥销锁紧挡圈 Lock rings with cone pin
  GB/T 883-86 | UDC 621.885 | 代替GB883-76
  螺钉锁紧挡圈 Lock ring with screw
  GB/T 884-86 | UDC 621.885 | 代替GB884-76
  带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip
  GB/T 885-86 | UDC 621.885 | 代替GB885-76
  轴肩挡圈 Rings for shoulder
  GB/T 886-86 | UDC 621.885 | 代替GB886-76
  螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw
  GB/T 891-86 | UDC 621.885 | 代替GB891-76
  螺栓紧固轴端挡圈 Lock rings at the end of shaft with bolt
  GB/T 892-86 | UDC 621.885 | 代替GB892-76
  孔用弹性挡圈-A型 Circlips for holes-type A
  GB/T 893.1-86 | UDC 621.885 | 代替GB893-76
  孔用弹性挡圈-B型 Circlips for hole-type B
  GB/T 893.2-86 | UDC 621.885
  轴用弹性挡圈-A型 Circlips for shaft-type A
  GB/T 894.1-86 | UDC 621.885 | 代替GB894-76
  轴用弹性挡圈-B型 Circlips for shaft-type B
  GB/T 894.2-86 | UDC 621.885
  孔用钢丝挡圈 Roundwire snap rings for hole
  GB/T 895.1-86 | UDC 621.885 | 代替GB895-76
  轴用钢丝挡圈 Roundwire snap rings for shaft
  GB/T 895.2-86 | UDC 621.885 | 代替GB895-76
  开口挡圈 “E”rings
  GB/T 896-86 | UDC 621.885 | 代替GB896-76
  钢丝锁圈 Round wire circlips
  GB/T 921-86 | UDC 621.885 | 代替GB921-76
  夹紧挡圈 Grip rings
  GB/T 960-86 | UDC 621.885 | 代替GB960-76
  销及键
  销轴 Clevis pins with head
  GB/T 882-86 | UDC 621.886 | 代替GB882-76
  开口销 Split pins
  GB/T 91-2000 | 代替GB/T 91-1986
  圆锥销 Taper pins
  GB/T 117-2000 | 代替GB/T 117-1996
  内螺纹圆锥销 Taper pins with internal thread
  GB/T 118-2000 | 代替GBT 118-1996
  圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins,of unhardened steel and austenitic stainless steel
  GB/T 119.1-2000 | 代替GB/T 119-1986
  圆柱销 淬硬钢和马氏体不锈钢 Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)
  GB/T 119.2-2000 | 代替GB/T 119-1986
  开尾圆锥销 Taper pins with split
  GB/T 877-76 | UDC 621.886 | 代替GB877-76
  螺纹圆柱销 Parallel pins with external thread
  GB/T 878-86 | UDC 621.886 | 代替GB878-76
  带孔销 Pins with split pin hole
  GB/T 880-86 | UDC 621.886 | 代替GB880-76
  螺尾锥销 Taper pins with external thread
  GB/T 881-2000 | 代替GB/T 881-1986
  内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
  GB/T 120.1-2000 | 代替GB/T 120-1986
  内螺纹圆柱销 淬硬钢和马氏体不锈钢 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
  GB/T 120.2-2000 | 代替GB/T 120-1986
  弹性圆柱销 直槽 轻型 Spring-type straight pins-Slotted,light duty
  GB/T 879.2-2000
  弹性圆柱销 直槽 重型 Spring-type straight pins-Slotted, heavy duty
  GB/T 879.1-2000 | 代替GB/T 879-1986
  弹性圆柱销 卷制 重型 Spring-type straight pins-Coiled,heavy duty
  GB/T 879.3-2000
  弹性圆柱销 卷制 标准型 Spring-type straight pins-Coiled,standard duty
  GB/T 879.4-2000
  弹性圆柱销 卷制 轻型 Spring-type straight pins-Coiled,light duty
  GB/T 879.5-2000
  槽销 平行沟槽 Crooved pins-Parallel grooved
  GB/T 13829.1-92
  槽销 锥销 Crooved pins-taper grooved
  GB/T 13829.2-92
  槽销 圆头 沉头 Grooved pins-with round head or countersunk head
  GB/T 13829.3-92
  组合件和连接副
  十字槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
  GB/T 9074.10-88 | UDC 621.882
  十字槽凹穴六角头螺栓和弹簧垫圈组合件 Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies
  GB/T 9074.12-88 | UDC 621.882
  十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件 Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies
  GB/T 9074.13-88 | UDC 621.882
  钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head for steel structures
  GB/T 1228-91 | 代替GB1228-84
  钢结构用高强度大六角头螺母 High strength large hexagon nuts for steel structures
  GB/T 1229-91 | 代替GB1229-84
  钢结构用高强度垫圈 High strength plain washers for steel structures
  GB/T 1230-91 | 代替GB1230-84
  钢结构用扭剪型高强度螺栓连接副 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
  GB/T 3632-1995 | 代替GB3632-83
  螺栓或螺钉和平垫圈组合件 Bolt or screw and washer assemblies with plain washers
  GB/T 9074.1-2002 | 代替GB/T 9074.1、9074.14-1988
  十字槽头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw and serrated lock washer external teeth assemblies
  GB/T 9074.2-88 | UDC 621.882
  十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single coll spring lock washer assemblies
  GB/T 9074.3-88 | UDC 621.882
  十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed pan head screw, single coil spring lock washer assemblies
  GB/T 9074.4-88 | UDC 621.882
  十字槽小盘头螺钉和平垫圈组合件 Cross recessed small pan head screw and small plain washer assemblies
  GB/T 9074.5-88 | UDC 621.882
  十字槽小盘头螺钉和大垫圈组合件 Cross recessed small pan head screw and big plain washer assemblies
  GB/T 9074.6-88 | UDC 621.882
  十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw and single coil spring lock washer assemblies
  GB/T 9074.7-88 | UDC 621.882
  十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies
  GB/T 9074.8-88 | UDC 621.882
  十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
  GB/T 9074.9-88 | UDC 621.882
  十字槽凹穴六角头螺栓和平垫圈组合件 Cross recessed hexagon bolt with indentation and plain washer assemblies
  GB/T 9074.11-88 | UDC 621.882
  六角头螺栓和弹簧垫圈组合件 Hexagon head bolt and single coil spring lock washer assemblies
  GB/T 9074.15-88 | UDC 621.882
  六角头螺栓和外锯齿锁紧垫圈组合件 Hexagon head bolt and serrated lock washer external teeth assemblies
  GB/T 9074.16-88 | UDC 621.882
  六角头螺栓、弹簧垫圈和平垫圈组合件 Hexagon head bolt,single coil spring lock washer and plain washer assemblies
  GB/T 9074.17-88 | UDC 621.882
  自攻螺钉和平垫圈组合件 Tapping screw and washer assemblies with plain washers
  GB/T 9074.18-2002 | 代替GB/T 9074.18、9074.19、9074、22、9074、23-1988
  十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tapping screw with indentation and plain washer assemblies
  GB/T 9074.20-88 | UDC 621.882
  十字槽凹穴六角头自攻螺钉和大垫圈组合件 Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies
  GB/T 9074.21-88 | UDC 621.882
  组合件用弹簧垫圈 Single coil spring lock washer for assembly
  GB/T 9074.26-88 | UDC 621.882
  组合件用外锯齿锁紧垫圈 Serrated lock washer external teeth for assembly
  GB/T 9074.27-88 | UDC 621.882
  组合件用锥形锁紧垫圈 Lountersunk external toothed lock washer for assembly
  GB/T 9074.28-88 | UDC 621.882
  腰状杆螺柱连接副型式分类 Connections with waisted stud-Tape classification
  GB/T 13807.1-92
  腰状杆螺柱连接副螺柱 Connections with waisted stud-Studs
  GB/T 13087.2-92
  腰状杆螺柱连接副螺母、受力套管 Connections with waisted stud-Nuts,extension sleeves
  GB/T 13087.3-92
  栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
  GB/T 18230.1-2000
  栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和 10.9级 Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9
  GB/T 18230.2-2000
  栓接结构用大六角头螺母 B级 8和10级 Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10
  GB/T 18230.3-2000
  栓接结构用1型大六角螺母 B级 10级 Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
  GB/T 18230.4-2000
  栓接结构用平垫圈 淬火并回火 Plain washers for high-strength structural bolting hardened and tempered
  GB/T 18230.5-2000
  栓接结构用1型大六角螺母浸热 镀锌(加大攻丝尺寸) A和B级 5.6和8级 Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8
  GB/T 18230.6-2000
  栓接结构用2型大六角螺母浸热 镀锌(加大攻丝尺寸) A级 9级 Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9
  GB/T 18230.7-2000
  焊钉
  无头焊钉 Headless studs for stud welding
  GB/T 10432-89
  电弧螺柱焊用圆柱头焊钉 Cheese head studs for arc stud welding
  GB/T 10433-2002 | 代替GB/T 10433-1989

万晨">资讯中心

咨询热线

0310-6666919